Outwell Air Repair Tube Yellow E 6.00 - 7.55 m

Despite air tent beams being very reliable on the whole, you may occasionally need to replace a beam. For this reason, Outwell has made 6 different-sized replacement beams available.

If your tent is an older model and not on the list then just remove the problem beam and measure it.

Once you have measured which size beam will be the nearest in length for you, choose the one which is the same length or longer. If the beam is too long, tightly roll it up until the correct length is reached then place the beam into the zipped casing.

Please remember to always read the recommended inflation pressure. We recommend inflating midway between the minimum and maximum. The pressure inside a beam will naturally increase in high temperatures so it's always sensible to allow for this. Bear in mind most campers arrive and set up in the morning whilst it's cooler, so by mid-afternoon the temperature and beam pressure will be increased. In mid Summer this does need to be taken into consideration.

This kit also includes a spare, replacement valve and a valve tool which you can use to easily untighten and tighten up your valves.

Please view the images on this listing which show a series of coloured charts produced by Outwell over the years. These detail that year's production of tents and the correct replacement beams for each model of tent.

Features: