FREE DELIVERY ON ORDERS OVER £100

How to Attach a Drive-Away Awning to Your Campervan

Outdoor Revolution Movelite T2 Driveaway Awning

Clay Cowie |

To attach a drive-away awning to your campervan, first identify the vehicle's connection system, measure its attachment height and check the awning's instructions. Then choose compatible fittings for that exact setup. A vehicle model name, a “low” height label or a “universal” fitting kit does not guarantee compatibility.

A drive-away awning provides extra space beside your vehicle and is designed to remain pitched when you disconnect and drive away. Follow the exact model's instructions for pitching, connection, disconnection and securing it while the vehicle is away.

Check these details before buying fittings

  • Your awning's exact model and version.
  • The ground-to-connection-point height, measured on level ground in your normal camping setup.
  • Your vehicle's rail, wind-out awning channel or other intended connection system.
  • The required beading size and usable connection length.
  • Clearance for doors, the connecting tunnel and fitted equipment.
  • Which accessories are included and which must be bought separately.

For help choosing the awning itself, read our drive-away awning buying guide. For measurements and tunnel adjustment, use our awning attachment-height guide.

Vehicles with an awning rail or channel

A compatible rail accepts the connection beading specified for that channel. Check both the rail and awning instructions for the correct sizes and method rather than assuming every rail accepts the same beading.

Some compatible setups permit direct insertion of the awning's beading. If you intend to disconnect and drive away, check the recommended removable connection arrangement before pitching. A suitable drive-away fitting kit can provide a connection you can separate without dismantling the whole awning.

What does a drive-away fitting kit do?

A fitting kit connects compatible vehicle and awning components in a way that allows them to be separated. Kador or twin-piping strips and figure-of-eight connectors are common components, but sizes and arrangements vary.

The Universal Twin Drive Away Fitting Kit listing specifies a 3m kador strip with 4mm and 6mm beading and three figure-of-eight connector sections. Check your channel size, awning connection beading and usable connection length before choosing it.

“Universal” does not mean every rail and awning combination is compatible. A fitting kit also does not change the awning's specified attachment-height range.

Vehicles with a wind-out awning

A compatible wind-out awning may provide a channel for connecting a drive-away awning. Check the exact wind-out model's instructions, channel size and permitted connection arrangement.

Do not assume every Fiamma, Thule or other wind-out awning has the same channel dimensions. Check the required connector and beading combination for your equipment, along with any restrictions on how the wind-out unit should be positioned and loaded.

Gutter rails and pole-and-clamp arrangements

Some suitable gutter rails may work with compatible connectors; other setups may require a manufacturer-approved pole-and-clamp arrangement. Check the rail profile, fittings and whether the awning provides the required sleeve or attachment points.

Do not force a connector onto a shallow or incompatible gutter, or assume a clamp is suitable for any roof bar or body fitting. Follow the vehicle-equipment and awning manufacturers' instructions.

What if your campervan has no awning rail?

Some models support alternative attachment arrangements, such as approved roof-bar connections, throw-over straps or a compatible removable connection system. The available options depend on the awning and vehicle.

Confirm the intended attachment points and any surface, material or weather restrictions before buying. Magnetic or suction-based accessories are not automatically suitable for every roof, and improvised dent pullers should not be treated as an approved awning connection method.

If your setup has no suitable approved connection, ask for advice rather than tying the awning to an arbitrary vehicle fitting. Installation of a rail should follow the vehicle and rail manufacturers' guidance or be carried out by an appropriate installer.

Connect and disconnect in the correct sequence

Use the pitching and connection sequence in your awning's instructions. Check that the connection is secure, the tunnel has its intended shape and doors remain usable. Use the specified adjustment points without overtensioning fabric or vehicle fittings.

Before driving away, fully disconnect the vehicle using the recommended procedure, close and secure the freestanding awning as directed, and check that no straps, connectors or other parts remain attached to the vehicle.

On your return, follow the model's reconnection instructions. Do not force the connection if the vehicle is poorly aligned or outside the intended attachment position.

See drive-away awnings on display in Cornwall

World of Camping has drive-away awnings on display at 4 Bamber House, Victoria, St Austell, PL26 8LQ, Cornwall. The confirmed selection includes the Outdoor Revolution Cayman Air Low 2026. Seeing the living space and tunnel layout can help you plan your setup, but a display does not confirm vehicle compatibility.

Bring your vehicle's make, model and year, measured attachment height and photographs of the connection point. Visitors travelling from Devon are welcome at our Cornwall showroom.

Read our tent and awning showroom guide and confirm opening hours and the exact display before travelling. Display availability is separate from purchase stock.

Looking after your awning after use

Follow the manufacturer's cleaning and packing instructions, protect fittings from damaging the fabric and dry the awning thoroughly before storage. Read our tent and awning winter-storage guide for a practical checklist.

Frequently asked questions

Will any drive-away awning attach to my campervan?

No. Check the exact attachment-height range, connection system, beading sizes, connection length and door clearance. Vehicle make and model alone do not confirm fit.

Do I need a drive-away fitting kit?

It depends on your vehicle and awning connection. Check the recommended removable connection arrangement if you want to disconnect the vehicle while leaving the awning pitched.

Are all awning rails and beading sizes the same?

No. Check the specifications for the exact rail or channel and the awning. Choose compatible fittings rather than assuming a standard size.

Can I attach a drive-away awning to a wind-out awning?

Some compatible systems allow this. Check the wind-out unit's instructions, channel dimensions and permitted setup, as well as the drive-away awning's requirements.

Can I attach an awning without a rail?

Some awnings support alternative approved methods, but suitability depends on the vehicle and equipment. Check the manufacturers' instructions before choosing roof-bar, strap or removable connection accessories.

Does a fitting kit change the awning's height range?

No. It provides a connection, not a different fitting-height range. Measure your vehicle's attachment point and stay within the exact model's specified range.

Can I leave the awning pitched while driving away?

A drive-away awning is designed for this use. Fully disconnect the vehicle and secure the awning according to the exact model's instructions before leaving.

What should I send when asking for connection advice?

Provide the awning model and version, vehicle make, model and year, measured attachment height, rail or wind-out unit details and clear photographs of the connection point.

Where can I see drive-away awnings before buying?

Visit World of Camping in Victoria, near St Austell, Cornwall. Contact us before travelling to confirm opening hours and your chosen display. Visitors from Devon are welcome.

EMPTY DOM REMOVE PROTECTOR