Outwell Air Repair Tube Yellow 600cm - 725cm

• 6.00m - 7.25m Long
• Adjust Beam Length If Needed
• Valve Tool Included

Despite air tent beams being very reliable on the whole, you may occasionally need to replace a beam. For this reason Outwell have made 4 diffferent sized replacement beams available.

This beam will fit these models -  Lakeville 7SA, Roseville 6SA, Avondale 6PA, Airville 6SA, Parkdale 6PA, Hartsdale 6PA, Knightdale 7PA, Lakeville 5SA

If your tent is an older model and not on the list then just remove the problem beam and measure it.

Once you have measured which size beam will be the nearest in length for you, choose the the one which is the same length or longer. If the beam is too long, tightly roll it up until the correct length is reached then place the beam into the zipped casing.

Please remember to always read the recommended inflation pressure. We recommend to inflate midway between the minimum and maximum. Pressure inside a beam will naturally increase in high temperatures so it's always sensible to allow for this. Bear in mind most campers arrive and set up in the morning whilst it's cooler, so by mid afternoon the temperature and beam pressure will be increased. In mid Summer this does need to be taken into consideration.

This kit also includes a spare, replacement valve and a valve tool which you can use to easily untighten and tighten up your valves.